Back to Blog
How-to Guides 2026-11-17 GoFit Fitness Equipment - GoFit. 0 views

GoPed Pedometer Setup: Count Steps, Distance, and Calories

GoPed Pedometer Setup: Count Steps, Distance, and Calories

Set up the GoPed Multifunctional Pedometer, load its CR2032 battery, and use its step, distance, speed, calorie, timer, and clock modes for everyday tracking.

What the GoPed tracks before you start

The GoPed Multifunctional Pedometer is a clip-on digital unit that counts steps, distance, speed, and calories burned. It also shows the time and works as a timer, so one device covers your walk, your workout, and your clock. A spring-loaded clip attaches it to a waistband or pocket edge, and the durable case protects it during normal use.

Because the supplied record does not include a full button-by-button sequence, the most reliable setup path is to read the included GoPed instructions first. Use the steps below to prepare the unit and understand its modes, then follow the manufacturer's instructions for any mode-specific button presses.

Set up the GoPed in four steps

The battery is not included, so plan for one CR2032 before your first walk.

  1. Insert one CR2032 battery: The GoPed uses one CR2032 battery, which is not included. Open the battery compartment as described in the GoPed instructions; the care notes say to use a coin to pry open the main unit rather than forcing it.
  2. Check the display and clock: Once powered, the digital display should show the time and be ready to switch among step, distance, speed, calorie, and timer modes. If the display stays blank, reseat the battery and confirm it is a CR2032.
  3. Clip it on securely: Attach the unit with the spring-loaded clip at your waistband or pocket edge. Do not press too hard on the clip or twist it, since the care notes warn against stressing the clip.
  4. Walk and review your modes: After your walk, cycle through the display to read steps, distance, speed, and calories burned. Use the timer for timed sessions and the clock for everyday timekeeping.

GoPed at a glance

  • GoPed Multifunctional Pedometer: Tracks steps, distance, speed, and calories burned, and also shows time and works as a timer. These are the modes you will switch between during setup and daily use, so knowing them helps you confirm the unit is working.
    GoPed Multifunctional Pedometer
    GoPed Multifunctional Pedometer
  • GoPed Multifunctional Pedometer: Uses one CR2032 battery, not included. You need the battery before first use; without it the display and tracking modes cannot run.
  • GoPed Multifunctional Pedometer: Spring-loaded attaching clip and durable case. The clip is how the pedometer stays on your clothing, and the case protects it during normal wear.

Pedometer step tracking tips that hold up

The supplied record does not list a calibration procedure, stride-length setting, or reset sequence. Rather than guess at button combinations, use these practical habits and check the GoPed instructions for any model-specific adjustments.

  • Wear it in the same spot each time: Consistency helps you compare day to day. Clip the GoPed to your waistband or pocket edge and keep that placement for your walks.
  • Keep the unit dry: The GoPed is not waterproof, so avoid contact with water. Take it off before washing hands, doing dishes, or walking in heavy rain.
  • Protect it from impact: The care notes say to avoid exposing the unit to impact or strong shock. A durable case helps, but dropping it on hard surfaces is still a risk.
  • Check for damage before each use: GoFit advises checking equipment thoroughly before every use for nicks, tears, holes, or other damage. If you see damage, stop using the GoPed and contact GoFit Customer Service.

Battery and reset: what the record supports

The GoPed runs on one CR2032 battery, and that is the only power detail the supplied record confirms. If the display dims or the unit stops responding, replace the battery with a fresh CR2032 and check that the compartment is closed properly. The record does not document a reset button or a reset procedure, so avoid inventing one; consult the GoPed instructions if you need to clear a mode or start a new count.

When opening the unit, use a coin to pry it open as instructed rather than forcing the case. Do not force-open the main unit, and do not press too hard on the clip or twist it, as these actions can damage the pedometer.

Warranty and care boundaries

GoFit products are warranted for 90 days from purchase against defects in material and workmanship under normal personal use. The warranty does not cover damage from neglect or abuse, use outside a home environment or personal use, or damage in shipping unless the item shipped direct from the GoFit Store. Damage from using the product in a manner not directed is also excluded.

To obtain warranty service, the original owner should contact GoFit Customer Service directly so the issue can be reviewed and resolved appropriately. Keep the GoPed dry, avoid impact, and follow the care notes in the instructions to stay within normal use.

Related Articles

Customer Service
Home
Products
Cart
Profile